WebCAE
WEBCAE 101 · CURRICULUM & HANDBOOK30 Lessons

WebCAE 101: Interactive Tutorials & PDF Handbook

30 step-by-step practical lessons covering linear and nonlinear statics, vibration, buckling, thermal, contact, beams and shells, geometric nonlinearity, 3D CAD modeling, sheet metal, assemblies, defeaturing, and CFD fluid domains — fully verified against analytical textbook benchmarks.

Lesson #01 · F01WASM Verified

A cantilever beam in twelve steps

Lesson PDF
Goal

Compute the tip deflection of a steel cantilever and check it against the textbook formula.

What You Will Get

The tip deflection of a steel cantilever: 1.600 mm by hand, 1.595 mm in WebCAE (web) and 1.596 mm in WebCAE desktop.

⏱ 6–7 min·12 steps
Step 1 of 12

Start a new project

When WebCAE opens, it shows the Start screen: New project, Open project…, Import STEP / STL… and a gallery of examples. While it is on screen the workspace behind it is not usable (a ribbon button highlights, but its panel does not open). Click New project: the Start screen closes and an empty project opens.

Step 1: Start a new project
Click to zoom
Verification

Verification against Analytical Benchmark

Quantity

By hand

WebCAE web (browser)

WebCAE desktop (native)

Error web / native

Tip deflection

mm

1.595 mm (Step 12, legend and Manual range)

1.596 mm (probe at the tip, from a separate desktop run; not on a frame)

0.34 % / 0.26 %

Formula. (Timoshenko shear adds ). Both numbers are within 5 % of it.

Automated Verification Assertions (PASS)
PASSTip deflection within 5% of analytical 1.600 mm
Target: 1.6 · Actual: 1.59463
PASSMeasure between end faces = 200 mm
Target: 200 · Actual: 200
PASSAll guide overlay targets found
Target: 0 · Actual: 0
Warning

Common Mistakes & Troubleshooting

Forgetting to select the force axis: The Force panel opens with no pre-selected axis. Always click the specific component chip (such as Z) and check the Will be saved: F = {0, 0, −100} N preview before clicking Apply.

Wrong face numbers: the numbers in this lesson come from the tree of a freshly created box. If your tree shows different numbers, find the end faces with Measure (step 6): the pair that is 200 mm apart.

Next

Where to Go Next

Proceed to lesson #2 — A bracket by operations, and is it strong enough? (F02) to build a part from boolean cuts, holes and fillets.

We use essential cookies to run this site, plus analytics cookies if you agree. Privacy Policy