Inspect pre-solved models in your browser in 2 seconds (up to 300k DOF) or solve 1.5M+ DOF assemblies 100% offline on Windows, macOS, and Linux.
Geometrically nonlinear multi-step simulation (loadpath="1,0.03", 62 equilibrium snapshots) of an 8-sector umbrella mechanism driven solely by the sliding runner sleeve (Node 3) with zero forces on the canopy: 8 straight ribs (deviation 0.001 mm) and 8 straight stretchers fold down along the shaft while the 640-quad MITC4 canopy forms 8 vertical star-shaped pleats.
Deployable umbrella mechanisms operate as spherical-hinge linkages coupled with a thin membrane canopy: as the runner sleeve (Node 3) is driven all the way down the central shaft (uz = -321.3 mm) with zero artificial loads applied to the canopy, 8 straight stretchers hinged without bending moment at top and bottom pull the 8 straight ribs inward along the central shaft (ring radii R = 7 → 15 → 22 → 30 → 38 → 45 → 53 → 61 → 69 → 76 → 84 mm, straightness deviation 0.001 mm), while the 8 polyester fabric panels between the ribs fold outward into 8 vertical star-shaped pleats (R_pleat = 256.7 mm). Reversing the runner travel back up the shaft unfolds the pleats and restores the octagonal canopy (Steps #1–#28 closure and Steps #29–#62 unfolding along loadpath="1,0.03").
Demonstrates WebCAE's ability to simulate deployable beam-and-membrane mechanisms, pantograph linkages, and foldable aerospace/architectural canopies driven purely from the actuator hub through full closure and reverse unfolding cycles.
14 days of full Pro access. The first charge occurs only after 14 days unless canceled beforehand.
Describe your part, load case, or CAD format — we reply within 2 business hours.
Click the AI chat button in the bottom-right corner to ask about boundary conditions, stress criteria, mesh convergence, or DSL scripting.
We use essential cookies to run this site, plus analytics cookies if you agree. Privacy Policy