WebCAE
WebCAE PlatformUnified FEA & CFD simulation platform: Browser WebAssembly + Native Desktop

Inspect pre-solved models in your browser in 2 seconds (up to 300k DOF) or solve 1.5M+ DOF assemblies 100% offline on Windows, macOS, and Linux.

Browser WASM
Up to 300k DOF · 2s load
Native Desktop (Pro)
Up to 1.5M+ DOF · 100% offline
Physics & Solvers
Static, Modal, Kσ, Contact, CFD
MITC4 Shell · Large Hencky Strain · Inter-Tube Contact · Φ = 513°MachineryMITC4 Shells & Beams

Twin Thin-Walled Tubes Braided Twist into Double Helix (MITC4 Shell)

Nonlinear geometric and material simulation of two parallel thin-walled cylindrical tubes (t = 2.2 mm, R_out = 20 mm, L = 320 mm) clamped at one end and braided under finite rotation into a double helix with contact and buckling folds.

When two parallel thin-walled circular tubes clamped at one end undergo large mutual twisting at the opposite end, three coupled nonlinearities govern the deformation: geometric finite rotation SO(3) with large Hencky logarithmic strain, unilateral contact pressure preventing tube interpenetration, and localized plastic buckle lobes along the braided spiral flute.

✓ MITC4 Shell Elements✓ Geometric Nonlinearity (Large Strain SO(3))✓ Inter-Tube Shell Contact✓ Thin-Wall Plastic Buckling & Folding
Pre-solved .wce container ready
3,552 MITC4 quads · t = 2.2 mm · 21 load steps · Φ = 513° · |u| = 76.8 mm · σ_vM = 312 MPa
Open in Web App (WASM) →
Opens directly on the Results tab in 2 seconds without re-solvingNeed 1.5M+ DOF offline? Get Pro ↓
Twin Thin-Walled Tubes Braided Twist into Double Helix (MITC4 Shell)
3,552 MITC4 quads · t = 2.2 mm · 21 load steps · Φ = 513° · |u| = 76.8 mm · σ_vM = 312 MPaLaunch 3D ↗
Shell Mesh
3,552 MITC4 quads (t = 2.2 mm)
Twist Angle
Φ = 513° (2.85 half-turns)
Max Displacement
|u| = 76.80 mm
Hencky Axial Pull
16.89 mm (large strain)
Peak von Mises
312.0 MPa (plastic plateau)

1. Geometry & FEA Mesh

  • •2 thin-walled tubes with dual-surface MITC4 quad mesh (outer radius R = 20 mm, inner radius R = 17.8 mm, wall thickness t = 2.2 mm, length L = 320 mm).
  • •3,552 MITC4 quad elements across 36 longitudinal bays and 24 circumferential sectors with ring end caps.
  • •21 progressive non-linear load steps tracing the full deformation path from initial parallel cylinders to tight double-helix braid.

2. Loads & Boundary Conditions

  • •Clamped fixed support on all DOFs at the right end (x = L = 320 mm).
  • •Prescribed large-rotation twist trajectory Φ = 513° (2.85 half-turns) with axial pull on the left end (x = 0).
  • •Unilateral penalty contact pairs preventing inter-tube penetration along the inner contact line.

3. Simulation Results & Findings

  • ✓Max displacement |u| = 76.80 mm with 16.89 mm tip axial shortening due to the Hencky large strain effect.
  • ✓Peak von Mises stress levels off at the plastic plateau 312.0 MPa with 0 MPa in the elastic root.
  • ✓42 active inter-tube contact pairs maintaining clean physical separation along the entire spiral flute.
Enterprise & Engineering Workflow

Demonstrates WebCAE's capability to simulate complex finite-rotation shell mechanics, contact algorithms, and large-strain deformation without convergence crashes.

Launch Case in Web App →
14-Day Free Trial · $0 Due Today
$99/ mo (billed monthly after 14-day trial)

14 days of full Pro access. The first charge occurs only after 14 days unless canceled beforehand.

  • ✓14-Day Trial ($0 Today) (cancel anytime)
  • ✓Up to 1.5M+ DOFs (direct sparse solver)
  • ✓Native Windows, macOS & Linux Apps (100% offline)
  • ✓Nonlinear Contact & Buckling (Kσ, MITC4, RBE2/RBE3)

$0 due today. First charge occurs in 14 days unless cancelled. Cancel anytime in 1 click in your account.

Need bespoke solver development or a Dedicated Cloud VPS (128+ GB RAM, 32 cores)?
We build turnkey industry FEA pipelines and custom material models for engineering teams.

Ask an Engineer About Your Model

Describe your part, load case, or CAD format — we reply within 2 business hours.

WebCAE AI Assistant in bottom-right ↘

Want an instant answer on FEA theory or this model?

Click the AI chat button in the bottom-right corner to ask about boundary conditions, stress criteria, mesh convergence, or DSL scripting.

We use essential cookies to run this site, plus analytics cookies if you agree. Privacy Policy