WebCAE
← All cases

NAFEMS LE1

StaticPASS · 3.62%

Elliptical membrane — stress concentration

Tolerance:
5%
Open & Solve in BrowserSign in or register to launch this verified model in WebCAE
Open & Solve in Browser

Problem statement

Geometry
Elliptical plate with an elliptical hole: outer semi-axes ≈ 3.25 and 2.75 m, hole semi-axes ≈ 2 and 1 m, thickness 0.1 m — per the standard NAFEMS LE1 setup.
Material
E = 210 GPa, ν = 0.3.
Boundary conditions
Uniform tensile pressure of 1 MPa on one outer edge; symmetry about both axes.
Measured quantity
Tangential stress σyy at point D, on the hole boundary along the minor axis.

WebCAE Terminal

Paste these commands into the Terminal panel inside WebCAE. They use the same text DSL as the application; run one command per line:

units mm
material E=210000 nu=0.3
import path="nafems-le1.step" format=step
mesh tet size=50 order=2
fix surface number 1 component=x
fix surface number 2 component=y
load surface number 3 pressure=-10
solve
probe stress_yy at=2000,0,0

Results comparison

Reference value92.7 MPa
Our result89.35 MPa
Deviation3.62%
Tolerance5%
StatusPASS · 3.62%
Element familyShell element
Mesh details(MITC4, DKT+CST), quarter-symmetry elliptic-membrane model; σyy at point D on the hole boundary. Coarse shell mesh — refinement near D would reduce the 3.62% further.

Updated: 2026-07-07 · before version numbering (before 0.1.1)

Run online FEA simulation in browserWebCAE Finite Element LibraryCAD to FEA workflow

We use essential cookies to run this site, plus analytics cookies if you agree. Privacy Policy