WebCAE
← All cases

NAFEMS LE8

Static (shells)PASS · 4.35%

Axisymmetric shell under internal pressure — hoop stress check away from the boundary.

Tolerance:
5%
Open & Solve in BrowserSign in or register to launch this verified model in WebCAE
Open & Solve in Browser

Problem statement

Geometry
Axisymmetric shell section.
Material
E = 210 GPa, ν = 0.3.
Boundary conditions
Uz = 0 at point A; Ur = 0 at point E; internal pressure of 1 MPa.
Measured quantity
Hoop stress on the outer surface, 36° from the circle centre — reference value 94.55 MPa.

WebCAE Terminal

Paste these commands into the Terminal panel inside WebCAE. They use the same text DSL as the application; run one command per line:

units mm
material E=210000 nu=0.3
import path="nafems-le8.step" format=step
section shell t=5
mesh shell size=20 element=quad
fix edge number 1
load surface number 1 pressure=0.1
solve
probe displacement_magnitude at=0,0,500

Results comparison

Reference value94.55 MPa (TNSB-1990)
Our result90.44 MPa (мелкая), 92.57 MPa (базовая)
Deviation4.35%
Tolerance5%
StatusPASS · 4.35%
Element familySolid element
Mesh detailshex8-клин 2° тела вращения (994 → 1926 nodes, 6 → 8 эл. по толщине), симметрия; купол отсечён при r=0.05 и заменён натяжением pR/2; профиль выведен из чертежей (тройка 3-4-5), σ_hoop(D): 92.57 → 90.44 MPa

Updated: 2026-08-10 · before version numbering (before 0.1.1)

Run online FEA simulation in browserWebCAE Finite Element LibraryCAD to FEA workflow

We use essential cookies to run this site, plus analytics cookies if you agree. Privacy Policy