WebCAE
← All cases

NAFEMS T4

Heat transferPASS · 0.31%

Two-dimensional steady-state heat conduction with convective boundary conditions — temperature check at an edge point, solved as an exact 3D extrusion equivalent.

Tolerance:
5%
Open & Solve in BrowserSign in or register to launch this verified model in WebCAE
Open & Solve in Browser

Problem statement

Geometry
Rectangle 0.6 m x 1.0 m (solved as a thin 3D extrusion in z with both z-faces insulated, which reproduces the 2D field exactly).
Material
Thermal conductivity k = 52 W/(m*C).
Boundary conditions
Edge AB (y = 0) held at 100 C; edge AD (x = 0) insulated; edges BC (x = 0.6) and CD (y = 1.0) convect with h = 750 W/(m^2*C) to a 0 C ambient.
Measured quantity
Temperature at point E (0.6, 0.2) on edge BC — reference value 18.3 C.

WebCAE Terminal

Paste these commands into the Terminal panel inside WebCAE. They use the same text DSL as the application; run one command per line:

units m
material kappa=52
primitive box dx=0.6 dy=1.0 dz=0.05
mesh hex size=0.05
thermal surface number 1 temperature=100
thermal surface number 2 convection=750 ambient=0
thermal surface number 3 convection=750 ambient=0
solve thermal
probe temperature at=0.6,1.0,0.025

Results comparison

Reference value18.3 °C (TNSB-1990COMSOL даёт 18.25 °C)
Our result18.251 °C (96×160), 18.244 °C (48×80)
Deviation0.31%
Tolerance5%
StatusPASS · 0.31%
Element familySolid element
Mesh detailshex8-экструзия 2D-постановки (z-грани изолированы), сетки 24×40 → 48×80 → 96×160: T(E) = 18.214 → 18.244 → 18.251 °C; (Dirichlet + Robin/конвекция), единицы СИ

Updated: 2026-08-10 · before version numbering (before 0.1.1)

Run online FEA simulation in browserWebCAE Finite Element LibraryCAD to FEA workflow

We use essential cookies to run this site, plus analytics cookies if you agree. Privacy Policy